source:Other information release time:2022-12-16 Hits: Popular:PCB Assembly company
As we usually say, PCB aging means that some component parameters on the circuit board will change after the circuit board is powered on for a certain period of time under certain conditions. This change is related to the use time of the circuit board, which is absolutely not allowed for some circuit boards with special purposes. Therefore, many circuit boards will undergo anti-aging treatment before leaving the factory to stabilize the circuit and then use it. This can greatly improve the reliability and security.
Practice of PCB aging test
In general industrial refrigerators, the use mode of single piece solderless parts is fixed, and the temperature generally varies alternately between - 40 ℃ and+55 ℃. In this process, the lower temperature should be maintained for 1 hour, and then slowly recovered to room temperature. In case of non room temperature, it should be maintained for 4 hours, and then slowly heated up to the maximum set temperature after 4 hours. This state should also be maintained for 2 hours, and then slowly reduced to room temperature, At this time, it is also necessary to keep it for 2 hours, take it out, check the minimum line and cut the health condition with vias. This process needs two cycles to ensure more.
Read recommendations:
1.6mm OSP Aluminum Circuit Board Single Sided Pcb Board Lightweight
Welcome information, we will answer for you quickly